Overview
GEX 40-50
In the past, one truck would be used for outdoor applications and another truck would be used for indoor warehousing. Now one GEX can handle both environments with ease. Transition smoothly from indoor transportation to outdoors with no effort required from the GEX.
Find Dealer
Features
Powered Reversing Drive Motors
The tires on the GEX 40 series contain a pivot point between the drive tires, which allows for zero-turn functionality with the tightest possible turning radius. The 2-wheel drive on the GEX provides added traction, especially on wet or uneven surfaces. And, the inside wheel power reverses in tight turns preventing scuffing of steer tires like conventional 4-wheel trucks. A tighter turn radius combined with anti-scuff design and additional stability allows for operators to navigate a wider variety of spaces with ease
LCD Dash Display
The LCD dash display on the GEX 40 series is fully adjustable and programmable, allowing certified operators to choose from four pre-set performance modes. The dash display also indicates the current alarm code and stores previous alarm codes for quick access, allowing technicians to quickly diagnose issues on the GEX 40. The LCD dash is also password protected, requiring a set password for certain adjustments that impact the operation of the truck.
80 Volt 100% AC System
Thanks to the 100% AC system and powerful 80V battery, the GEX 40 rivals IC truck performance in speed, acceleration, and gradeability. The GEX 40 series is equipped with a higher voltage system, which lowers line loss and heating, leading to greater efficiency. The GEX 40 is also better suited to rapid charge, because it only requires one receptacle via a single battery connector for rapid charging. Finally, the series can accommodate different batteries for increased operational efficiency. The GEX 40/45/50 can accommodate 72 kwh battery, increasing battery capacity and efficiency. All GEX models are EPA compliant.
Stable Platform
The GEX 40 series is built on a stable platform with a low center of gravity, which was achieved by moving back the steer axle, dropping the battery compartment, and moving all major components to the lower half of the truck. This increases stability and reliability in all operations. The curve cutback feature on the GEX 40 reduces truck travel speed in turns, adding to the lateral stability of the truck, along with the wide stance of the truck.
Drive Motors & Axles
The drive motors and axles on the GEX 40 series has fewer parts than typical drive motors, meaning minimum wear and leading to less downtime for your forklift. The drive motors are enclosed and brushless, and are equipped with thermal and stall protection. They are also equipped to add power when reversing for tighter turns. And, with sealed motor components, the GEX 40 is suitable for wet applications.
Applications
Tech Specs
| Load Capacity / Rated Load (lbs/kg) | Height Overhead Guard (in/mm) | Width (in/mm) | Right Angle Stack (in/mm) | Outside Turning Radius (in/mm) | Inside Turning Radius (in/mm) | Top Speed Loaded (kmp/mph) | Top Speed Unloaded (kmp/mph) | Power Unit - HP(KW) @rpm | |
|---|---|---|---|---|---|---|---|---|---|
| GEX 40 | 8000 / 4000 | 90.9 / 2310 | 55 (1396) | 127.7 (3244) | 105.3 / 2675 | N/A / N/A | 12.4 / 20.0 | 13 / 21.0 | 80 Volt |
| GEX 45 | 9000 / 4500 | 90.9 / 2310 | 58.7 (1490) | 127.7 (3244) | 105.3 / 2675 | N/A / N/A | 11.8 / 19 | 12.4 / 20.0 | 80 Volt |
| GEX 50 | 10000 / 4900 | 90.9 / 2310 | 58.7 (1490) | 128.7 (3269) | 106.3 / 2700 | N/A / N/A | 11.8 / 19 | 12.4 / 20.0 | 80 Volt |
Gallery
